¶
25/5/2026
MDH UserManual
¶
20/4/2026
MDH UserManual
¶
15/1/2026
MDH UserManual
¶
12/1/2026
MDH 1.7.0 Release Notes
¶
03/11/2025
MEGA Compatibility with Lightburn Instructions
¶
27/10/2025
MEGA Use Lightburn to carve long materials (conveyor belts)
¶
24/10/2025
MEGA How to adjust and replace the X-axis belt
¶
22/10/2025
MEGA How to replace a carbon dioxide gas cylinder
MEGA How to calibrate the optical path
¶
18/09/2025
MEGA Intelligent Fill Function Description
¶
16/09/2025
MEGA Lightburn TCP connection device
¶
01/09/2025
Z-axis reset stuck / insufficient descent distance
¶
28/08/2025
MDH 1.6.1 Release Notes
¶
31/07/2025
MDH 1.6.0 Release Notes
MDH 1.6.0 Update Guide
MEGA Conveyor System Assembly Manual
¶
24/07/2025
MEGA Camera Calibration Settings
¶
30/06/2025
Mega Query the software version and firmware version
Mega cannot access the camera
¶
27/06/2025
MDH 1.5.x Update Guide
Mega Lite upgrade firmware
¶
26/06/2025
Mega Lightburn Auto Focus
¶
24/06/2025
Mega MDH Camera Distortion Correction (Manual Calibration Version)
Mega MDH Camera Distortion Correction (express edition）
¶
23/06/2025
MDH 1.5.0 Release Notes
¶
17/06/2025
Mega leakage inspection method
¶
13/06/2025
Mega User Manual Lite（LightBurn）
¶
12/06/2025
MEGA LightBurn engraving not closing description
¶
9/06/2025
MEGA replaces the exhaust pipe adapter
¶
5/06/2025
Mega carving step loss exception
¶
3/06/2025
MEGA Airflow System Upgrade
¶
30/05/2025
Mega Power Detection
¶
27/05/2025
MDH 1.4.0 Release Note
MDH 1.4.X Update Guide
SmartFill Manual Guide
MEGA Introduction to Conveyor Belt Batch Engraving Mode
MEGA Rotary Axis Usage Tutorial - Lightburn
Mage water is added without circulation
¶
21/05/2025
Mega Adjust focus
MEGA How to Set Up the LightBurn Camera (express edition）
¶
16/05/2025
MEGA How to Set Up the LightBurn Camera (Manual Calibration Version)
¶
12/05/2025
Mega The carving lines are too thick
Mega The carved lines exhibit wave-like
Mega Poor carving/cutting effect
¶
09/05/2025
Mege Laser Head Cleaning and Maintenance Guide
Mega How to replace the motherboard
¶
08/05/2025
MEGA Rotary Axis Usage Tutorial - Lightburn
Mega The carving lines are too thick
Mega The carved lines exhibit wave-like curves
¶
07/05/2025
Mega Air Tube Kinking Solution
MDH USB Connection Failure with Mega
MDH Device Discovery Failure After Mega Wifi Configuration
¶
29/04/2025
How to engrave better quality
¶
28/04/2025
MDH 1.3.2 Release Page
¶
24/04/2025
MDH 1.3.x Update Guide
How to Set Up Wi-Fi for Mega Using LightBurn
¶
16/04/2025
MDH 1.3.0 Release Page
¶
14/04/2025
Mega User Manual
MEGA Laser Engraving Machine Instruction Manual