¶ Upgrade the firmware
¶ 1.connecting device
Important: If your device doesn't show
up in the USB Devices list after plugging
in the cable, contact our after-sales
support at: support@monportlaser.com
After the machine has completed its startup, connect the device to the computer using a USB data cable, and then open LightBurn.
¶ 2. Configure the network
- Distribution network instruction：BBB,WIFI,SET,AH001.,12345678
（AH001. This is the Wi-Fi name, and 12345678 is the Wi-Fi password.）
- Query IP：BBB,WIFI,GET,IP
¶ 3.Download the upgrade tool
Step 1: Download the upgrade tool
————————megaUpdate_1.0.4.0.zip————————
Step 2: Right-click on the "runupdate_1.0.3.1.bat" and "runversion.bat"files, and open them with Notepad.
Step 3:Input the device IP address retrieved from Lightburn and save it.
Step 4：Double-click the"runupdate_1.0.3.1.bat" file and wait for the upgrade progress to reach 100%. Then press any key to end the upgrade process.
Step 5：After the equipment restarts, you can double-click to run the "runversion.bat" file to check the current version number. Confirm whether the upgrade was successful
